UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4083
                        
                            Issued:1959-05-01
                    
                            Revised:2012-03-12
                    
                            Style
                            4083
                        
                            Multiple-conductor flexible cable
                    
			Rating60 deg C, 300 Vac, Horizontal Flame.
		
			Conductor105 strands of 40 AWG conductor. Conductors shall be provided with a cotton separator, maximum lay of bunch stranded conductors shall be 1 inch.
		
			InsulationExtruded SBR/NR, 30 mils minimum average thickness, 27 mils minimum thickness at any point. Each individual insulated conductor is closely woven with rayon braid.
		
			AssemblyThree insulated conductors shall be twisted with a maximum length of lay of 2 inches (a 5% tolerance shall be provided). A cotton filler shall be provided. Binder over assembled conductors shall be optional.
		
			CoveringA glazed cotton braid shall be provided over the assembled insulated conductors.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor use only as the connection between the motor and base of oscillating fans. Polarity identification: Braids of contrasting colors on the individual conductors, or tracers of contrasting colors in white braid.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4083	Issued:1959-05-01
			Revised:2012-03-12


Rating	60 deg C, 300 Vac, Horizontal Flame.

Conductor	105 strands of 40 AWG conductor. Conductors shall be provided with a cotton separator, maximum lay of bunch stranded conductors shall be 1 inch.

Insulation	Extruded SBR/NR, 30 mils minimum average thickness, 27 mils minimum thickness at any point. Each individual insulated conductor is closely woven with rayon braid.

Assembly	Three insulated conductors shall be twisted with a maximum length of lay of 2 inches (a 5% tolerance shall be provided). A cotton filler shall be provided. Binder over assembled conductors shall be optional.

Covering	A glazed cotton braid shall be provided over the assembled insulated conductors.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For use only as the connection between the motor and base of oscillating fans. Polarity identification: Braids of contrasting colors on the individual conductors, or tracers of contrasting colors in white braid.