UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4084
                        
                            Issued:1959-05-01
                    
                            Revised:2012-07-30
                    
                            Style
                            4084
                        
                            Multiple conductor cable with extruded insulation and non-extruded covering
                    
			Rating60 deg C, 300 Vac.
		
			ConductorTwo - 105 40 AWG copper strands provided with a cotton separator. Maximum lay of bunch stranded conductors shall be 1 inch.
		
			InsulationExtruded SBR/NR, extruded NR or extruded EP, 30 mils min average, 27 mils minimum at any point, closely woven rayon braid on individual insulated conductors.
		
			AssemblyTwo conductors shall be twisted with a maximum lay of 1-3/4 inches (a 5% tolerance shall be provided). A cotton filler shall be provided. Binder over assembled conductors shall be optional.
		
			CoveringA glazed cotton braid shall be provided over the assembled conductors.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor use only as the connection between the motor and base of oscillating fans. Polarity identification: Braids of contrasting colors on the individual conductors, or tracers of contrasting colors in white braid.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4084	Issued:1959-05-01
			Revised:2012-07-30


Rating	60 deg C, 300 Vac.

Conductor	Two - 105 40 AWG copper strands provided with a cotton separator. Maximum lay of bunch stranded conductors shall be 1 inch.

Insulation	Extruded SBR/NR, extruded NR or extruded EP, 30 mils min average, 27 mils minimum at any point, closely woven rayon braid on individual insulated conductors.

Assembly	Two conductors shall be twisted with a maximum lay of 1-3/4 inches (a 5% tolerance shall be provided). A cotton filler shall be provided. Binder over assembled conductors shall be optional.

Covering	A glazed cotton braid shall be provided over the assembled conductors.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For use only as the connection between the motor and base of oscillating fans. Polarity identification: Braids of contrasting colors on the individual conductors, or tracers of contrasting colors in white braid.