UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4093
                        
                            Issued:1959-05-01
                    
                            Revised:2012-04-24
                    
                            Style
                            4093
                        
                            Single conductor with extruded insulation.
                    
			Rating75 deg C, 300 Vac.
		
			Conductor18 AWG consisting of 16-30 AWG strands.
		
			InsulationExtruded SRB/NR, 15 mils minimum average thickness, 14 mils minimum thickness at any point.
		
			AssemblyIndividual conductors twisted together. The twisted conductors shall then be wrapped in a cloth tape, the outer face of which shall be coated with rubber.
		
			CoveringCotton or rayon braid on individual insulated conductors. A closely woven lacquered cotton or rayon braid shall be provided over the assembled conductors.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseOnly between the switch and motor of ventilating fans where the acceptability of the combination has been determined by Underwriters Laboratories Inc. Note: This cord connects the fan motor to the switch and is fixed in position to prevent undue flexing.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4093	Issued:1959-05-01
			Revised:2012-04-24


Rating	75 deg C, 300 Vac.

Conductor	18 AWG consisting of 16-30 AWG strands.

Insulation	Extruded SRB/NR, 15 mils minimum average thickness, 14 mils minimum thickness at any point.

Assembly	Individual conductors twisted together. The twisted conductors shall then be wrapped in a cloth tape, the outer face of which shall be coated with rubber.

Covering	Cotton or rayon braid on individual insulated conductors. A closely woven lacquered cotton or rayon braid shall be provided over the assembled conductors.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Only between the switch and motor of ventilating fans where the acceptability of the combination has been determined by Underwriters Laboratories Inc. Note: This cord connects the fan motor to the switch and is fixed in position to prevent undue flexing.