UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4097
                        
                            Issued:1959-05-01
                    
                            Revised:2014-02-24
                    
                            Style
                            4097
                        
                            Multiple-Conductor Cable Using Extruded Non-Integral Jacket
                    
			Rating60 deg C, 300 Vac, FT2 flame.
		
			ConductorFour No. 18 AWG Conductors, consisting of No. 34 AWG stranding.
		
			InsulationExtruded CP or CPE or EP or NBR/PVC or NR - NEOPRENE or SRB/NR or XL, 15 mils minimum average thickness, 14 mils minimum thickness at any point.
		
			AssemblySame as for type SV Cord.
		
			JacketExtruded CP, CPE or EPDM or NBR/PVC or NR - NEOPRENE or SRB/NR, 30 mils minimum average thickness, 24 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseIn hospital signal equipment, or in appliances.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4097	Issued:1959-05-01
			Revised:2014-02-24


Rating	60 deg C, 300 Vac, FT2 flame.

Conductor	Four No. 18 AWG Conductors, consisting of No. 34 AWG stranding.

Insulation	Extruded CP or CPE or EP or NBR/PVC or NR - NEOPRENE or SRB/NR or XL, 15 mils minimum average thickness, 14 mils minimum thickness at any point.

Assembly	Same as for type SV Cord.

Jacket	Extruded CP, CPE or EPDM or NBR/PVC or NR - NEOPRENE or SRB/NR, 30 mils minimum average thickness, 24 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	In hospital signal equipment, or in appliances.