UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4115
                        
                            Issued:1959-05-01
                    
                            Revised:2011-11-04
                    
                            Style
                            4115
                        
                            Parallel cable with extruded integral insulation and jacket.
                    
			Rating90 deg C, 300 Vac, Horizontal flame, Oil Resistant 60 deg C (optional).
		
			Conductor18 AWG - 16 AWG consisting of three No. 18 AWG and one No. 16 AWG, using No. 30 AWG or smaller tinned or bare copper strands.
		
			InsulationIntegral with Jacket. NR - NEOPRENE, 60 mils min average, 54 mils minimum at any point. Web thickness: 0.078 in. Wall after rip: 0.028 in.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Electric Refrigerators and where ripped not more than three inches unless installed in a separate metal enclosure. May add: and where exposed to temperature not exceeding 90 deg C, and where exposed to oil at a temperature not exceeding 60 deg C. Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4115	Issued:1959-05-01
			Revised:2011-11-04


Rating	90 deg C, 300 Vac, Horizontal flame, Oil Resistant 60 deg C (optional).

Conductor	18 AWG - 16 AWG consisting of three No. 18 AWG and one No. 16 AWG, using No. 30 AWG or smaller tinned or bare copper strands.

Insulation	Integral with Jacket. NR - NEOPRENE, 60 mils min average, 54 mils minimum at any point. Web thickness: 0.078 in. Wall after rip: 0.028 in.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Electric Refrigerators and where ripped not more than three inches unless installed in a separate metal enclosure. May add: and where exposed to temperature not exceeding 90 deg C, and where exposed to oil at a temperature not exceeding 60 deg C. Polarity identification may be omitted.