UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4123
                        
                            Issued:1959-05-01
                    
                            Revised:2012-04-24
                    
                            Style
                            4123
                        
                            Parallel cable with extruded integral insulatin and jacket.
                    
			Rating60 deg C, 300 Vac, Horizontal flame.
		
			Conductor18 AWG consisting of No. 30 AWG stranded.
		
			InsulationIntegral with Jacket. Extruded SRB/NR, 75 mils minimum average thickness, 68 mils minimum thickness at any point.
		
			AssemblyTwo conductors, same as Type SP-1.
		
			JacketA nominal 80 mils separation between conductors. The following minimum (pin gauge) dimensions shall apply: Wall thickness: 0.028 in. Web thickness: 0.070 in. Wall after rip: 0.028 in.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electric refrigerators where installed within separate metal enclosures or between the walls of the cabinet. Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4123	Issued:1959-05-01
			Revised:2012-04-24


Rating	60 deg C, 300 Vac, Horizontal flame.

Conductor	18 AWG consisting of No. 30 AWG stranded.

Insulation	Integral with Jacket. Extruded SRB/NR, 75 mils minimum average thickness, 68 mils minimum thickness at any point.

Assembly	Two conductors, same as Type SP-1.

Jacket	A nominal 80 mils separation between conductors. The following minimum (pin gauge) dimensions shall apply: Wall thickness: 0.028 in. Web thickness: 0.070 in. Wall after rip: 0.028 in.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electric refrigerators where installed within separate metal enclosures or between the walls of the cabinet. Polarity identification may be omitted.