UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4129
                        
                            Issued:1959-05-01
                    
                            Revised:2012-04-09
                    
                            Style
                            4129
                        
                            Parallel cable using extruded integral insulation and jacket
                    
			Rating75 deg C, 300 Vac, Oil Resistant 60 deg C.
		
			Conductor18 AWG consisting of No. 30 AWG or smaller strands.
		
			InsulationIntegral with Jacket. Extruded NR - NEOPRENE, 75 mils min average, 68 mils minimum at any point.
		
			AssemblyTwo conductors, same as type SP-1 Cord. A nominal 80 mils separation between conductors. The following minimum (pin gauge) dimensions shall apply: Wall thickness: 0.028 in., Web thickness: 0.070 in., Wall after rip: 0.028 in.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electric refrigerators where installed within separate metal enclosures or between walls of the cabinet, and where exposed to temperatures not exceeding 75 deg C, and where exposed to oil at a temperature not exceeding 60 deg C. Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4129	Issued:1959-05-01
			Revised:2012-04-09


Rating	75 deg C, 300 Vac, Oil Resistant 60 deg C.

Conductor	18 AWG consisting of No. 30 AWG or smaller strands.

Insulation	Integral with Jacket. Extruded NR - NEOPRENE, 75 mils min average, 68 mils minimum at any point.

Assembly	Two conductors, same as type SP-1 Cord. A nominal 80 mils separation between conductors. The following minimum (pin gauge) dimensions shall apply: Wall thickness: 0.028 in., Web thickness: 0.070 in., Wall after rip: 0.028 in.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electric refrigerators where installed within separate metal enclosures or between walls of the cabinet, and where exposed to temperatures not exceeding 75 deg C, and where exposed to oil at a temperature not exceeding 60 deg C. Polarity identification may be omitted.