UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4133
                        
                            Issued:1959-05-01
                    
                            Revised:2012-07-30
                    
                            Style
                            4133
                        
                            Parallel cable with extruded integral insulation and jacket.
                    
			Rating90 deg C, 300 Vac, 60 deg C Oil.
		
			Conductor18 AWG consisting of No. 30 AWG or smaller strands.

			InsulationIntegral with Jacket. Extruded Neoprene, 30 mils minimum average thickness, 27 mils minimum at any point with a nominal 80 mils separation between conductors.  The following minimum (pin gauge) dimensions shall apply:  Wall thickness: 0.028 in.
                         Web thickness: 0.070 in.
                         Wall after rip: 0.028 in.

			AssemblyThree conductors, same as for Type SP-1, with a nominal 80 mils separation between conductors. The following minimum (pin gauge) dimensions shall apply: Wall thickness: 0.028 in., Web thickness: 0.070 in., Wall after rip: 0.028 in.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electric refrigerators where installed within separate metal enclosures or between walls of the cabinet. Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4133	Issued:1959-05-01
			Revised:2012-07-30


Rating	90 deg C, 300 Vac, 60 deg C Oil.

Conductor	18 AWG consisting of No. 30 AWG or smaller strands.

Insulation	Integral with Jacket. Extruded Neoprene, 30 mils minimum average thickness, 27 mils minimum at any point with a nominal 80 mils separation between conductors. The following minimum (pin gauge) dimensions shall apply: Wall thickness: 0.028 in. Web thickness: 0.070 in. Wall after rip: 0.028 in.

Assembly	Three conductors, same as for Type SP-1, with a nominal 80 mils separation between conductors. The following minimum (pin gauge) dimensions shall apply: Wall thickness: 0.028 in., Web thickness: 0.070 in., Wall after rip: 0.028 in.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electric refrigerators where installed within separate metal enclosures or between walls of the cabinet. Polarity identification may be omitted.