UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4134
                        
                            Issued:1959-05-01
                    
                            Revised:2012-04-13
                    
                            Style
                            4134
                        
                            Parallel cable with extruded integral insulation abd jacket.
                    
			Rating90 deg C, 300 Vac, Oil Resistant 60 deg C.
		
			Conductor18 AWG, stranded, consisting of No. 30 AWG or smaller.
		
			InsulationIntegral with Jacket. Extruded neoprene, 75 mils min average, 68 mils minimum at any point.
		
			AssemblyFour conductors, same as type SP-1 Cord. A nominal 80 mils separation between conductors. The following minimum (pin gauge) dimensions shall apply: Wall thickness: 28 mils, Web thickness: 70 mils., Wall after rip: 28 mils.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electric refrigerators where installed within separate metal enclosures or between walls of the cabinet, and where exposed to temperatures not exceeding 90 deg C, and where exposed to oil at a temperature not exceeding 60 deg C. Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4134	Issued:1959-05-01
			Revised:2012-04-13


Rating	90 deg C, 300 Vac, Oil Resistant 60 deg C.

Conductor	18 AWG, stranded, consisting of No. 30 AWG or smaller.

Insulation	Integral with Jacket. Extruded neoprene, 75 mils min average, 68 mils minimum at any point.

Assembly	Four conductors, same as type SP-1 Cord. A nominal 80 mils separation between conductors. The following minimum (pin gauge) dimensions shall apply: Wall thickness: 28 mils, Web thickness: 70 mils., Wall after rip: 28 mils.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electric refrigerators where installed within separate metal enclosures or between walls of the cabinet, and where exposed to temperatures not exceeding 90 deg C, and where exposed to oil at a temperature not exceeding 60 deg C. Polarity identification may be omitted.