UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4135
                        
                            Issued:1959-05-01
                    
                            Revised:2011-10-20
                    
                            Style
                            4135
                        
                            Parallel cable with extruded integral insulation.
                    
			Rating60 deg C, 300 Vac, Horizontal flame.
		
			Conductor20 AWG consisting of No. 30 AWG or smaller strands, tinned or bare copper.
		
			InsulationIntegral with Jacket. Extruded SBR/NR, 60 mils min average, 54 mils minimum at any point.
		
			AssemblyTwo conductors, same as type SP-2, except for a nominal 60 mils wall and the following minimum (pin gauge) dimensions: Wall thickness: 0.058 in., Web thickness: 0.078 in., Wall after rip: 0.028 in.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electric refrigerators where installed within separate metal enclosures or between the walls of the cabinet. Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4135	Issued:1959-05-01
			Revised:2011-10-20


Rating	60 deg C, 300 Vac, Horizontal flame.

Conductor	20 AWG consisting of No. 30 AWG or smaller strands, tinned or bare copper.

Insulation	Integral with Jacket. Extruded SBR/NR, 60 mils min average, 54 mils minimum at any point.

Assembly	Two conductors, same as type SP-2, except for a nominal 60 mils wall and the following minimum (pin gauge) dimensions: Wall thickness: 0.058 in., Web thickness: 0.078 in., Wall after rip: 0.028 in.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electric refrigerators where installed within separate metal enclosures or between the walls of the cabinet. Polarity identification may be omitted.