UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4138
                        
                            Issued:1959-05-01
                    
                            Revised:2012-07-21
                    
                            Style
                            4138
                        
                            Parallel cable with extruded integral insulation and jacket
                    
			Rating90 deg C, 300 Vac, Oil Resistant 60 deg C.
		
			Conductor20 AWG consisting of No. 30 AWG or smaller tinned or bare copper, solid or stranded.
		
			InsulationIntegral with Jacket. NR - NEOPRENE, 60 mils min average, 54 mils minimum at any point.
		
			AssemblyTwo conductors, same as type SP-2 except for a nominal 60 mils and the following minimum and(pin gauge) dimensions: Wall thickness: 0.058 in., Web thickness: 0.078 in., Wall after rip: 0.028 in.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electric refrigerators where installed within separate metal enclosures or between walls of the cabinet, and where exposed to temperatures not exceeding 90 deg C, and where exposed to oil at a temperature not exceeding 60 deg C. Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4138	Issued:1959-05-01
			Revised:2012-07-21


Rating	90 deg C, 300 Vac, Oil Resistant 60 deg C.

Conductor	20 AWG consisting of No. 30 AWG or smaller tinned or bare copper, solid or stranded.

Insulation	Integral with Jacket. NR - NEOPRENE, 60 mils min average, 54 mils minimum at any point.

Assembly	Two conductors, same as type SP-2 except for a nominal 60 mils and the following minimum and(pin gauge) dimensions: Wall thickness: 0.058 in., Web thickness: 0.078 in., Wall after rip: 0.028 in.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electric refrigerators where installed within separate metal enclosures or between walls of the cabinet, and where exposed to temperatures not exceeding 90 deg C, and where exposed to oil at a temperature not exceeding 60 deg C. Polarity identification may be omitted.