UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4143
                        
                            Issued:1959-05-01
                    
                            Revised:2011-11-07
                    
                            Style
                            4143
                        
                            Multiconductor cable with extruded non-integral jacket.
                    
			Rating60 deg C, 300 Vac, FT2 flame, 60 deg C Oil.
		
			Conductor16 AWG consisting of No. 65 No. 34 AWG copper strands with a 1-1/4 inch left hand lay.
		
			InsulationExtruded SRB/NR, 30 mils minimum average thickness, 27 mils minimum thickness at any point.
		
			AssemblyFour conductors, same as type SJO.  Conductors are twisted with a 2-1/4 inch left hand lay with 6 ends of No. 14 Jute in each interstice. A cotton serve is wound over this core. Over this a copper shield consisting of No. 34 AWG copper strands is braided.  Another cotton serving is applied over the shield.
		
			JacketExtruded Neoprene, 30 mils minimum average thickness, 24 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseSuitable for use only in the wiring of x-ray machines.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4143	Issued:1959-05-01
			Revised:2011-11-07


Rating	60 deg C, 300 Vac, FT2 flame, 60 deg C Oil.

Conductor	16 AWG consisting of No. 65 No. 34 AWG copper strands with a 1-1/4 inch left hand lay.

Insulation	Extruded SRB/NR, 30 mils minimum average thickness, 27 mils minimum thickness at any point.

Assembly	Four conductors, same as type SJO. Conductors are twisted with a 2-1/4 inch left hand lay with 6 ends of No. 14 Jute in each interstice. A cotton serve is wound over this core. Over this a copper shield consisting of No. 34 AWG copper strands is braided. Another cotton serving is applied over the shield.

Jacket	Extruded Neoprene, 30 mils minimum average thickness, 24 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Suitable for use only in the wiring of x-ray machines.