UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4146
                        
                            Issued:1959-05-01
                    
                            Revised:2012-04-06
                    
                            Style
                            4146
                        
                            Multiple conductor with extruded insulation and covering.
                    
			Rating60 deg C, 300 Vac.
		
			Conductor21 AWG consisting of 105 No. 40 AWG or smaller stranded, tinned or bare copper.
		
			InsulationExtruded SRB/NR, 30 mils min average, 27 mils minimum at any point. Closely woven cotton braid on individual insulated conductors.
		
			AssemblyTwo copper conductors provided with a cotton separator, maximum lay of bunch stranded conductors shall be 1 inch. Conductors shall be twisted with a maximum lay of 2.5 inches (a 5% tolerance shall be permitted). Cotton fillers shall be provided.
		
			CoveringA glazed cotton braid shall be provided over the assembled conductors.
		
			BraidOptional.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor use only as the connection between the motor and base of Oscillating Fans. Polarity identification: Braids of contrasting colors on the individual conductors, or tracers of contrasting colors in braid.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4146	Issued:1959-05-01
			Revised:2012-04-06


Rating	60 deg C, 300 Vac.

Conductor	21 AWG consisting of 105 No. 40 AWG or smaller stranded, tinned or bare copper.

Insulation	Extruded SRB/NR, 30 mils min average, 27 mils minimum at any point. Closely woven cotton braid on individual insulated conductors.

Assembly	Two copper conductors provided with a cotton separator, maximum lay of bunch stranded conductors shall be 1 inch. Conductors shall be twisted with a maximum lay of 2.5 inches (a 5% tolerance shall be permitted). Cotton fillers shall be provided.

Covering	A glazed cotton braid shall be provided over the assembled conductors.

Braid	Optional.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For use only as the connection between the motor and base of Oscillating Fans. Polarity identification: Braids of contrasting colors on the individual conductors, or tracers of contrasting colors in braid.