UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4147
                        
                            Issued:1959-05-01
                    
                            Revised:2012-07-15
                    
                            Style
                            4147
                        
                            Multiple Conductor Cable using Non-Integral Non-Extruded Covering
                    
			Rating60 deg C, 300 Vac, Horizontal Flame
		
			Conductor19 AWG Stranded Round, maximum lay of bunch stranded conductors shall be 1 inch.
		
			InsulationExtruded SBR/NR, 15 mils minimum average, 13 mils minimum at any point.
		
			AssemblyFive insulated conductors provided with a cotton separator. Conductors shall be twisted with a maximum lay of 2.5 inches (a 5% tolerance shall be permitted). Cotton fillers shall be provided.
		
			CoveringNon-Extruded Glazed Cotton Braid shall be provided over the assembled conductors. Thickness not specified.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring for use only as the connection between the motor and base of oscillating fans. Polarity identification: Braids of contrasting colors on the individual conductors, or tracers of contrasting colors in braid.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4147	Issued:1959-05-01
			Revised:2012-07-15


Rating	60 deg C, 300 Vac, Horizontal Flame

Conductor	19 AWG Stranded Round, maximum lay of bunch stranded conductors shall be 1 inch.

Insulation	Extruded SBR/NR, 15 mils minimum average, 13 mils minimum at any point.

Assembly	Five insulated conductors provided with a cotton separator. Conductors shall be twisted with a maximum lay of 2.5 inches (a 5% tolerance shall be permitted). Cotton fillers shall be provided.

Covering	Non-Extruded Glazed Cotton Braid shall be provided over the assembled conductors. Thickness not specified.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring for use only as the connection between the motor and base of oscillating fans. Polarity identification: Braids of contrasting colors on the individual conductors, or tracers of contrasting colors in braid.