UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4153
                        
                            Issued:1959-05-01
                    
                            Revised:2012-04-09
                    
                            Style
                            4153
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60 deg C, 300 Vac, FT2 flame
		
			Conductor20 AWG stranded
		
			InsulationExtruded SBR/NR, 20 mils minimum average thickness, 18 mils minimum thickness at any point
		
			AssemblyFive conductors, same as type SV Cord, except with a maximum conductor lay of three inches.  A cotton wrap shall be applied over the assembly.
		
			ShieldOptional.
		
			JacketExtruded SBR/NR, 30 mils minimum average thickness, 24 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor use only on dictating and transcribing machines.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4153	Issued:1959-05-01
			Revised:2012-04-09


Rating	60 deg C, 300 Vac, FT2 flame

Conductor	20 AWG stranded

Insulation	Extruded SBR/NR, 20 mils minimum average thickness, 18 mils minimum thickness at any point

Assembly	Five conductors, same as type SV Cord, except with a maximum conductor lay of three inches. A cotton wrap shall be applied over the assembly.

Shield	Optional.

Jacket	Extruded SBR/NR, 30 mils minimum average thickness, 24 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For use only on dictating and transcribing machines.