UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4156
                        
                            Issued:1959-05-01
                    
                            Revised:2012-02-10
                    
                            Style
                            4156
                        
                            Multi-conductor Cable with Extruded Non-Integral Jacket.
                    
			Rating60 deg C, 300 Vac, FT2 flame.
		
			ConductorTinsel conductors.  The maximum resistance of each conductor shall be 240 ohms per 1000 ft at 25 deg C.
		
			InsulationExtruded SRB/NR, extruded EP, extruded Neoprene, extruded CP or extruded NBR/PVC, 15 mils minimum average thickness, 13 mils minimum thickness at any point.
		
			AssemblySix conductors, similar to Type SV cord, except 3.5 inches maximum lay of conductors.
		
			ShieldOptional.
		
			JacketExtruded Neoprene, extruded CP, extruded EP, extruded NBR/PVC or extruded Thermoset CPE, 30 mils minimum average thickness, 24 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor use only on dictating and transcribing machines.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4156	Issued:1959-05-01
			Revised:2012-02-10


Rating	60 deg C, 300 Vac, FT2 flame.

Conductor	Tinsel conductors. The maximum resistance of each conductor shall be 240 ohms per 1000 ft at 25 deg C.

Insulation	Extruded SRB/NR, extruded EP, extruded Neoprene, extruded CP or extruded NBR/PVC, 15 mils minimum average thickness, 13 mils minimum thickness at any point.

Assembly	Six conductors, similar to Type SV cord, except 3.5 inches maximum lay of conductors.

Shield	Optional.

Jacket	Extruded Neoprene, extruded CP, extruded EP, extruded NBR/PVC or extruded Thermoset CPE, 30 mils minimum average thickness, 24 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For use only on dictating and transcribing machines.