UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4181
                        
                            Issued:1961-07-26
                    
                            Revised:2012-07-28
                    
                            Style
                            4181
                        
                            Parallel cable with extruded integral insulation and jacket.
                    
			Rating90 deg C, 600 Vac, Horizontal flame, Optional- 60 deg C Oil Resistance.
		
			Conductor18 AWG - 16 AWG consisting of No. 30 AWG or smaller copper strands.
		
			InsulationIntegral with Jacket. Extruded NEOPRENE, 60 mils minimum average thickness, 54 mils minimum thickness at any point.
		
			AssemblyThree conductors, same as type SP Cord, with a nominal 60 mils wall and the following (pin gauge) dimensions: Wall thickness: 0.058 in., Web thickness: 0.141 in., Wall after rip: 0.058 in.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electric refrigerators and where exposed to temperatures not exceeding 90 deg C. May add: and where exposed to oil at a temperature not exceeding 60 deg C. Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4181	Issued:1961-07-26
			Revised:2012-07-28


Rating	90 deg C, 600 Vac, Horizontal flame, Optional- 60 deg C Oil Resistance.

Conductor	18 AWG - 16 AWG consisting of No. 30 AWG or smaller copper strands.

Insulation	Integral with Jacket. Extruded NEOPRENE, 60 mils minimum average thickness, 54 mils minimum thickness at any point.

Assembly	Three conductors, same as type SP Cord, with a nominal 60 mils wall and the following (pin gauge) dimensions: Wall thickness: 0.058 in., Web thickness: 0.141 in., Wall after rip: 0.058 in.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electric refrigerators and where exposed to temperatures not exceeding 90 deg C. May add: and where exposed to oil at a temperature not exceeding 60 deg C. Polarity identification may be omitted.