UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4184
                        
                            Issued:1961-11-15
                    
                            Revised:2012-03-14
                    
                            Style
                            4184
                        
                            Parallel Cable with Extruded Integral Insulation and Jacket
                    
			Rating90 deg C, 300 Vac, Horizontal flame, Oil Resistant 60 deg C.
		
			Conductor18 AWG - 16 AWG with 30 or finer strands.
		
			InsulationExtruded NR - NEOPRENE, integral with Jacket, 28 mils minimum average thickness, 25 mils minimum thickness at any point.
		
			AssemblyThree conductors, same as type SP-1 Cord, Cross-section of ripped conductor insulation shall be circular.
		
			Minimum dimensions (pin gauge) as follows:
		
			Wall thicknessbefore and after rip:28 mils
		
			Web thickness:78 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Window Fans. Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4184	Issued:1961-11-15
			Revised:2012-03-14


Rating	90 deg C, 300 Vac, Horizontal flame, Oil Resistant 60 deg C.

Conductor	18 AWG - 16 AWG with 30 or finer strands.

Insulation	Extruded NR - NEOPRENE, integral with Jacket, 28 mils minimum average thickness, 25 mils minimum thickness at any point.

Assembly	Three conductors, same as type SP-1 Cord, Cross-section of ripped conductor insulation shall be circular.
	Minimum dimensions (pin gauge) as follows:
	Wall thickness	before and after rip:	28 mils
	Web thickness:	78 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Window Fans. Polarity identification may be omitted.