UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4191
                        
                            Issued:1963-07-09
                    
                            Revised:2012-04-23
                    
                            Style
                            4191
                        
                            Parallel cable with extruded integral insulation and jacket similar to Type SP Cord.
                    
			Rating90 deg C, 600 Vac, Horizontal flame, Optional - 60 deg C Oil.
		
			Conductor18 AWG - 16 AWG consisting of 30 AWG or smaller copper strands.
		
			InsulationIntegral with Jacket. Extruded Neoprene, 60 mils minimum average thickness, 54 mils minimum thickness at any point.
		
			AssemblyFive conductors, same as for Type SP Cord with a nominal 60 mils wall and the following (pin gauge) dimensiions: Wall thickness: 0.058 in., Web thickness: 0.141 in., Wall after rip: 0.058 in.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor use in internal wiring of electric refrigerators where ripped not more than 15 in. Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4191	Issued:1963-07-09
			Revised:2012-04-23


Rating	90 deg C, 600 Vac, Horizontal flame, Optional - 60 deg C Oil.

Conductor	18 AWG - 16 AWG consisting of 30 AWG or smaller copper strands.

Insulation	Integral with Jacket. Extruded Neoprene, 60 mils minimum average thickness, 54 mils minimum thickness at any point.

Assembly	Five conductors, same as for Type SP Cord with a nominal 60 mils wall and the following (pin gauge) dimensiions: Wall thickness: 0.058 in., Web thickness: 0.141 in., Wall after rip: 0.058 in.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For use in internal wiring of electric refrigerators where ripped not more than 15 in. Polarity identification may be omitted.