UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4192
                        
                            Issued:1963-09-12
                    
                            Revised:2012-04-13
                    
                            Style
                            4192
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating60 deg C, 300 Vac, Horizontal flame.
		
			Conductor18 AWG Flat, tinned tinsel conductors, each composed of six metal ribbons wound around a center core of high tenacity polyester or 8/4 cotton yarn. A cotton (2 ends 50/2/1 or polyester knit separator is provided between the conductor and insulation.
		
			InsulationExtruded SBR/NR, 15 mils minimum average thickness, 13 mils minimum thickness at any point.
		
			AssemblyFour conductors, same as type SV, but with a lay of twist opposite in direction to the direction in which the helical cord is wound.
		
			JacketExtruded neoprene, 30 mils minimum average thickness, 24 mils minimum thickness at any point. The cord is vulcanized while coiled in a helical shape on a mandrel. When the helix is stretched out and released, the cord returns to its helical form because of the elasticity of the jacket.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseSuitable for hand set cord of telephone for use in hazardous locations.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4192	Issued:1963-09-12
			Revised:2012-04-13


Rating	60 deg C, 300 Vac, Horizontal flame.

Conductor	18 AWG Flat, tinned tinsel conductors, each composed of six metal ribbons wound around a center core of high tenacity polyester or 8/4 cotton yarn. A cotton (2 ends 50/2/1 or polyester knit separator is provided between the conductor and insulation.

Insulation	Extruded SBR/NR, 15 mils minimum average thickness, 13 mils minimum thickness at any point.

Assembly	Four conductors, same as type SV, but with a lay of twist opposite in direction to the direction in which the helical cord is wound.

Jacket	Extruded neoprene, 30 mils minimum average thickness, 24 mils minimum thickness at any point. The cord is vulcanized while coiled in a helical shape on a mandrel. When the helix is stretched out and released, the cord returns to its helical form because of the elasticity of the jacket.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Suitable for hand set cord of telephone for use in hazardous locations.