UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4202
                        
                            Issued:1964-06-08
                    
                            Revised:2012-04-16
                    
                            Style
                            4202
                        
                            Multiconductor cable with extruded non-integral jacket.
                    
			Rating60 deg C,voltage rating not specified, Cable flame.
		
			Conductor26 AWG minimum, stranded.
		
			InsulationExtruded PVC, Labled or complies with manufacturer's AWM Procedure.
		
			AssemblyFour or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon: PETP tape: or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional. Over one or more insulated conductors, non-ferrous material, braided or wrapped.
		
			SeparatorCotton braid, applied directly under the jacket.
		
			JacketExtruded Neoprene.
		
			Diameter of cable under jacket (inches)Average thickness (mils)Minimum thickness at any point (mils)
		
			0.701-1.5008064
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			Use"Appliance-wiring material suitable for use with electronic computers and business machines."
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4202	Issued:1964-06-08
			Revised:2012-04-16


Rating	60 deg C,voltage rating not specified, Cable flame.

Conductor	26 AWG minimum, stranded.

Insulation	Extruded PVC, Labled or complies with manufacturer's AWM Procedure.

Assembly	Four or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon: PETP tape: or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional. Over one or more insulated conductors, non-ferrous material, braided or wrapped.

Separator	Cotton braid, applied directly under the jacket.

Jacket	Extruded Neoprene.
	Diameter of cable under jacket (inches)	Average thickness (mils)	Minimum thickness at any point (mils)
	0.701-1.500	80	64

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	"Appliance-wiring material suitable for use with electronic computers and business machines."