UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4205
                        
                            Issued:1964-08-24
                    
                            Revised:2012-07-31
                    
                            Style
                            4205
                        
                            Multi conductor cable with extruded insulation and non-integral Jacket
                    
			Rating75 deg C, voltage rating not specified, Cable flame.
		
			Conductor26 AWG - 10 AWG min, stranded copper.
		
			InsulationExtruded PVC, Single conductor, Labled or complies with manufacturer's AWM Procedure, rated min. 80 deg C.
		
			AssemblyFour or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon: oriented polyethylene terephthalate: or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional. Over one or more insulated conductors, non-ferrous material, braided or wrapped.
		
			BraidOptional.
		
			JacketExtruded NR - NEOPRENE, 60 mils min average, 48 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			Use"Appliance wiring material suitable for use with electronic computers and business machines"
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4205	Issued:1964-08-24
			Revised:2012-07-31


Rating	75 deg C, voltage rating not specified, Cable flame.

Conductor	26 AWG - 10 AWG min, stranded copper.

Insulation	Extruded PVC, Single conductor, Labled or complies with manufacturer's AWM Procedure, rated min. 80 deg C.

Assembly	Four or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon: oriented polyethylene terephthalate: or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional. Over one or more insulated conductors, non-ferrous material, braided or wrapped.

Braid	Optional.

Jacket	Extruded NR - NEOPRENE, 60 mils min average, 48 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	"Appliance wiring material suitable for use with electronic computers and business machines"