UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4211
                        
                            Issued:1966-05-19
                    
                            Revised:2012-02-22
                    
                            Style
                            4211
                        
                            Parallel cable with extruded integral insulation and jacket
                    
			Rating105 deg C, 300 Vac, Horizontal Flame. Optional - 80 deg C Oil
		
			Conductor18 AWG - 16 AWG consisting of 30 AWG or smaller strands. Separator paper shall be applied over conductor. Not required when tinned conductors are employed.
		
			InsulationExtruded CP, 60 mils minimum average thickness, 54 mils minimum thickness at any point
		
			AssemblyTwo conductors, same as type SP Cord with the following dimensions: Web thickness: 0.078 inch, Wall thickness after rip: 0.028 in. See Facing Page for Compound Designation.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor use only in the internal wiring of electric refrigerators where ripped not more than 3 inch, or for use only in the wiring of butter conditioners where exposed at the door hinge.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4211	Issued:1966-05-19
			Revised:2012-02-22


Rating	105 deg C, 300 Vac, Horizontal Flame. Optional - 80 deg C Oil

Conductor	18 AWG - 16 AWG consisting of 30 AWG or smaller strands. Separator paper shall be applied over conductor. Not required when tinned conductors are employed.

Insulation	Extruded CP, 60 mils minimum average thickness, 54 mils minimum thickness at any point

Assembly	Two conductors, same as type SP Cord with the following dimensions: Web thickness: 0.078 inch, Wall thickness after rip: 0.028 in. See Facing Page for Compound Designation.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For use only in the internal wiring of electric refrigerators where ripped not more than 3 inch, or for use only in the wiring of butter conditioners where exposed at the door hinge.