UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4213
                        
                            Issued:1966-08-09
                    
                            Revised:2012-03-14
                    
                            Style
                            4213
                        
                            Parallel Cable with Extruded Integral Insulation and Jacket
                    
			Rating90 deg C, 600 Vac, Oil Resistant 60 deg C (optional).
		
			Conductor18 AWG - 16 AWG consisting of 30 AWG or smaller strands, solid, round, tinned or bare.
		
			InsulationExtruded NR - NEOPRENE, integral with Jacket, 60 mils minimum average thickness, 54 mils minimum thikcness at any point.
		
			AssemblyFour conductors, same as type SP Cord, with a nominal 60 mils wall thickness and the following (pin gauge) dimensions:
		
			Wall thickness:58 mils
		
			Web thickness:141 mils
		
			Wall after rip:58 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor use in internal wiring of electric refrigerators where ripped not more than 15 inches. Polarity identification may be omitted.

                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4213	Issued:1966-08-09
			Revised:2012-03-14


Rating	90 deg C, 600 Vac, Oil Resistant 60 deg C (optional).

Conductor	18 AWG - 16 AWG consisting of 30 AWG or smaller strands, solid, round, tinned or bare.

Insulation	Extruded NR - NEOPRENE, integral with Jacket, 60 mils minimum average thickness, 54 mils minimum thikcness at any point.

Assembly	Four conductors, same as type SP Cord, with a nominal 60 mils wall thickness and the following (pin gauge) dimensions:
	Wall thickness:	58 mils
	Web thickness:	141 mils
	Wall after rip:	58 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For use in internal wiring of electric refrigerators where ripped not more than 15 inches. Polarity identification may be omitted.