UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4214
                        
                            Issued:1967-11-29
                    
                            Revised:2019-11-07
                    
                            Style
                            4214
                        
                            Multiple-conductor using non-integral jacket
                    
			Rating90 deg C, voltage rating not specified, Cable flame.
		
			Conductor26 AWG, min., stranded copper.
		
			InsulationPVC, Labeled or complies with manufacturer's AWM Procedure.
		
			AssemblyFour or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon: oriented polyethylene terephthalate: or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional. Over one or more insulated conductors, non-ferrous material, braided or wrapped.
		
			SeparatorCotton of fibrous braid, applied directly under the jacket
		
			JacketNR - NEOPRENE
		
			dia of cable under jacket
		
			0.425 inches or less35 mils min average30 mils min at any point
		
			0.426-0.700 dia60 avg48 min
		
			0.701-1.500 dia80 avg64 min
		
			1.501-2.500 dia110 avg88 min
		
			2.501 dia or larger140 avg112 min
		
			Misc.Separator Cotton or fibrous braid, applied directly under the jacket.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			Use"Appliance-wiring material suitable for use with electronic computers and business machines."
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4214	Issued:1967-11-29
			Revised:2019-11-07


Rating	90 deg C, voltage rating not specified, Cable flame.

Conductor	26 AWG, min., stranded copper.

Insulation	PVC, Labeled or complies with manufacturer's AWM Procedure.

Assembly	Four or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon: oriented polyethylene terephthalate: or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional. Over one or more insulated conductors, non-ferrous material, braided or wrapped.

Separator	Cotton of fibrous braid, applied directly under the jacket

Jacket	NR - NEOPRENE
	dia of cable under jacket
	0.425 inches or less	35 mils min average	30 mils min at any point
	0.426-0.700 dia	60 avg	48 min
	0.701-1.500 dia	80 avg	64 min
	1.501-2.500 dia	110 avg	88 min
	2.501 dia or larger	140 avg	112 min

Misc.	Separator Cotton or fibrous braid, applied directly under the jacket.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	"Appliance-wiring material suitable for use with electronic computers and business machines."