UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4216
                        
                            Issued:1968-05-13
                    
                            Revised:2019-11-07
                    
                            Style
                            4216
                        
                            Multiconductor Cable with Extruded Non-Integral Jacket
                    
			Rating90 deg C, 600 Vac, Cable flame, Oil Resistant 60 deg C (optional), Moisture Resistant 60 deg C
		
			Conductor22 AWG - 1000kcmil solid or stranded round, tinned or bare copper.
		
			InsulationLabeled AWM or singles complying with this manufacturer's AWM Procedure, having a minimum rating of 90 deg C dry, 60 deg C wet, and 600 volts. The designations of all individual conductors used in making up the cable shall be available.
		
			AssemblyTwo or more. Two conductor cable may be flat or twisted. Three or more conductors shall be twisted. If more than one group is used, groups shall be twisted together. (The length of lay of the twisted conductors or groups is not specified). Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional.
		
			JacketExtruded NR - NEOPRENE
		
			dia of cable under jacket
		
			0.425 inches or less45 mils min average36 mils min at any point
		
			0.426-0.700 dia60 avg48 min
		
			0.701- 1.500 dia110 avg88 min
		
			2.501 dia and larger140 avg112 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of appliances or electronic equipment, Oil Resistant 60 deg C (optional), Moisture Resistant 60 deg C.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4216	Issued:1968-05-13
			Revised:2019-11-07


Rating	90 deg C, 600 Vac, Cable flame, Oil Resistant 60 deg C (optional), Moisture Resistant 60 deg C

Conductor	22 AWG - 1000kcmil solid or stranded round, tinned or bare copper.

Insulation	Labeled AWM or singles complying with this manufacturer's AWM Procedure, having a minimum rating of 90 deg C dry, 60 deg C wet, and 600 volts. The designations of all individual conductors used in making up the cable shall be available.

Assembly	Two or more. Two conductor cable may be flat or twisted. Three or more conductors shall be twisted. If more than one group is used, groups shall be twisted together. (The length of lay of the twisted conductors or groups is not specified). Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional.

Jacket	Extruded NR - NEOPRENE
	dia of cable under jacket
	0.425 inches or less	45 mils min average	36 mils min at any point
	0.426-0.700 dia	60 avg	48 min
	0.701- 1.500 dia	110 avg	88 min
	2.501 dia and larger	140 avg	112 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of appliances or electronic equipment, Oil Resistant 60 deg C (optional), Moisture Resistant 60 deg C.