UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4221
                        
                            Issued:1970-04-22
                    
                            Revised:2019-10-11
                    
                            Style
                            4221
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating60 deg C, 300 Vac, Horizontal flame.
		
			Conductor18 AWG stranded.
		
			InsulationExtruded CP or Extruded CPE or Extruded EP or Extruded NBR/PVC or Extruded NEOPRENE or Extruded SRB/NR or Extruded XL, 15 mils minimum average thickness, 13 mils minimum thickness at any point.
		
			AssemblySame as for Type SVO, SJO, OR SO. Note; 0.045 in min when coiled in form of a helix.
		
			Shield0.001 in polyester tape over assembly with 23 AWG stranded tinned copper drain (grounding) wire, with polyester-aluminum foil tape over polyester tape and drain wire.
		
			JacketExtruded CP or Extruded EPDM or Extruded NBR/PVC or Extruded NEOPRENE or Extruded SRB/NR, 30 mils min average thickness, 24 mils minimum thickness at any point. 0.045 in min when coiled in form of a helix.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4221	Issued:1970-04-22
			Revised:2019-10-11


Rating	60 deg C, 300 Vac, Horizontal flame.

Conductor	18 AWG stranded.

Insulation	Extruded CP or Extruded CPE or Extruded EP or Extruded NBR/PVC or Extruded NEOPRENE or Extruded SRB/NR or Extruded XL, 15 mils minimum average thickness, 13 mils minimum thickness at any point.

Assembly	Same as for Type SVO, SJO, OR SO. Note; 0.045 in min when coiled in form of a helix.

Shield	0.001 in polyester tape over assembly with 23 AWG stranded tinned copper drain (grounding) wire, with polyester-aluminum foil tape over polyester tape and drain wire.

Jacket	Extruded CP or Extruded EPDM or Extruded NBR/PVC or Extruded NEOPRENE or Extruded SRB/NR, 30 mils min average thickness, 24 mils minimum thickness at any point. 0.045 in min when coiled in form of a helix.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.