UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4226
                        
                            Issued:1971-07-27
                    
                            Revised:2012-07-07
                    
                            Style
                            4226
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60 deg C, voltage rating not specified, FT2 flame, 60 deg C Oil.
		
			ConductorNo. 22 AWG consisting of 16 No. 34 AWG copper strands.
		
			InsulationExtruded SRB/NR, 30 mils min average, 27 mils minimum at any point.
		
			AssemblyCable consists of 3 conductors.  Conductors are twisted together with jute fillers. Two of the conductors are provided with tinned copper braids. The lay of conductors is 1 1/4 in. The assembly is covered with a cotton serve.
		
			ShieldOver core assembly is a tinned copper braid.
		
			JacketExtruded CP, 30 mils min average, 24 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseSuitable for use only in the wiring of x-ray machines.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4226	Issued:1971-07-27
			Revised:2012-07-07


Rating	60 deg C, voltage rating not specified, FT2 flame, 60 deg C Oil.

Conductor	No. 22 AWG consisting of 16 No. 34 AWG copper strands.

Insulation	Extruded SRB/NR, 30 mils min average, 27 mils minimum at any point.

Assembly	Cable consists of 3 conductors. Conductors are twisted together with jute fillers. Two of the conductors are provided with tinned copper braids. The lay of conductors is 1 1/4 in. The assembly is covered with a cotton serve.

Shield	Over core assembly is a tinned copper braid.

Jacket	Extruded CP, 30 mils min average, 24 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Suitable for use only in the wiring of x-ray machines.