UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4242
                        
                            Issued:1972-10-04
                    
                            Revised:2019-11-07
                    
                            Style
                            4242
                        
                            Jacketed Cable
                    
			Rating90 deg C, 300 Vac, Cable flame.
		
			Conductor22 AWG - 14 AWG, solid or stranded round, tinned or bare copper.
		
			InsulationPVC, 22 mils min average, 18 mils minimum at any point.
		
			AssemblyTwo or more individually insulated conductors with or without covering, or groups of insulated conductors, with or without covering, cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable butare not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon: oriented polyethylene terephthalate: or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly of individual conductors or groups ofconductors.
		
			ShieldOptional.
		
			CoveringExtruded Nylon, 4 mils minimum thickness  (Optional).
		
			JacketNR - NEOPRENE
		
			dia of cable under jacket
		
			0.425 inches or less45 mils min average36 mils min at any point
		
			0.426-0.700 dia60 avg48 min
		
			0.701-1.500 dia80 avg64 min
		
			1.501-2.500 dia110 avg88 min
		
			2.501 dia or larger140 avg112 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor use in industrial fork-lift trucks.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4242	Issued:1972-10-04
			Revised:2019-11-07


Rating	90 deg C, 300 Vac, Cable flame.

Conductor	22 AWG - 14 AWG, solid or stranded round, tinned or bare copper.

Insulation	PVC, 22 mils min average, 18 mils minimum at any point.

Assembly	Two or more individually insulated conductors with or without covering, or groups of insulated conductors, with or without covering, cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable butare not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon: oriented polyethylene terephthalate: or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly of individual conductors or groups ofconductors.

Shield	Optional.

Covering	Extruded Nylon, 4 mils minimum thickness (Optional).

Jacket	NR - NEOPRENE
	dia of cable under jacket
	0.425 inches or less	45 mils min average	36 mils min at any point
	0.426-0.700 dia	60 avg	48 min
	0.701-1.500 dia	80 avg	64 min
	1.501-2.500 dia	110 avg	88 min
	2.501 dia or larger	140 avg	112 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For use in industrial fork-lift trucks.