UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4243
                        
                            Issued:1972-12-19
                    
                            Revised:2011-11-04
                    
                            Style
                            4243
                        
                            Multiconductor cable with extruded non-integral jacket.
                    
			Rating90 deg C, 600 Vac, FT2 flame, 60 deg C oil rated jacket.
		
			Conductor18 AWG - 10 AWG stranded, tinned or bare copper.
		
			InsulationEP, 31 mils min average, 28 mils minimum at any point. 10 AWG, 0.047 in. min. average, 0.043 in. min. at any point, and 18 AWG, 0.031 in. min. average, 0.028 in. min. at any point.
		
			AssemblyFive conductors, same as type SJO. 2-10 AWG and 3- 18 AWG twisted together with jute fillers and 7 in. maximum lay, 10 mils rubber filled tape or paper tape separator. Optional Nylon covering (4 mils) on insulated conductors.
		
			JacketCP, 78 mils min average, 70 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseSuitable for use only in the wiring of x-ray machines.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4243	Issued:1972-12-19
			Revised:2011-11-04


Rating	90 deg C, 600 Vac, FT2 flame, 60 deg C oil rated jacket.

Conductor	18 AWG - 10 AWG stranded, tinned or bare copper.

Insulation	EP, 31 mils min average, 28 mils minimum at any point. 10 AWG, 0.047 in. min. average, 0.043 in. min. at any point, and 18 AWG, 0.031 in. min. average, 0.028 in. min. at any point.

Assembly	Five conductors, same as type SJO. 2-10 AWG and 3- 18 AWG twisted together with jute fillers and 7 in. maximum lay, 10 mils rubber filled tape or paper tape separator. Optional Nylon covering (4 mils) on insulated conductors.

Jacket	CP, 78 mils min average, 70 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Suitable for use only in the wiring of x-ray machines.