UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4247
                        
                            Issued:1973-03-07
                    
                            Revised:2012-07-18
                    
                            Style
                            4247
                        
                            Parallel Cable using integral jacket.
                    
			Rating90 deg C, 125 Vac, Horizontal flame.
		
			Conductor22 AWG consisting of 36 AWG copper strands, bunch stranded, tinned or bare copper.
		
			IntegralExtruded NR - NEOPRENE, 30 mils min average, 27 mils minimum at any point.
		
			AssemblyThree conductors, same as type SP-1 Cord. The center grounding conductor shall have a green knit or braid to identify it.
		
			BraidOptional.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or as listed power supply cords (permanently) attached and not exceeding 8 feet in length) for curling irons, wood burning appliances, or 1/2 pound and lighter soldering irons; rated 60 watts or less for use in appliances where grounding is not required.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4247	Issued:1973-03-07
			Revised:2012-07-18


Rating	90 deg C, 125 Vac, Horizontal flame.

Conductor	22 AWG consisting of 36 AWG copper strands, bunch stranded, tinned or bare copper.

Integral	Extruded NR - NEOPRENE, 30 mils min average, 27 mils minimum at any point.

Assembly	Three conductors, same as type SP-1 Cord. The center grounding conductor shall have a green knit or braid to identify it.

Braid	Optional.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or as listed power supply cords (permanently) attached and not exceeding 8 feet in length) for curling irons, wood burning appliances, or 1/2 pound and lighter soldering irons; rated 60 watts or less for use in appliances where grounding is not required.