UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4248
                        
                            Issued:1973-03-12
                    
                            Revised:2012-07-22
                    
                            Style
                            4248
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating90 deg C, 125 Vac, Horizontal flame.
		
			ConductorCircuit Conductors 22 AWG, grounding conductor 22 AWG - 18 AWG, consisting of 36 AWG copper strands, bunch stranded.
		
			InsulationExtruded NEOPRENE, 13 mils min average, 12 mils minimum at any point.
		
			AssemblyTwo or three conductors. Conductors twisted together with a maximum lay of 1-1/2 inches. One conductor shall be solid white or natural gray. The third, if provided shall be green with or without a yellow stripe.
		
			JacketExtruded CP, 25 mils min average, 20 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseTwo Conductor Cord or Three Conductor Cord with No. 18 AWG Grounding Conductor: "As listed power supply cord (permanently attached and not exceeding 8 feet in length) for curling irons, wood burning appliances, or 1/2 pound and lighter soldering irons; rated 50 watts or less." Three Conductor Cord Grounding Conductor Smaller than No. 18 AWG: In addition to the statement above, the tag shall also indicate, "for use in appliance where grounding in not required.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4248	Issued:1973-03-12
			Revised:2012-07-22


Rating	90 deg C, 125 Vac, Horizontal flame.

Conductor	Circuit Conductors 22 AWG, grounding conductor 22 AWG - 18 AWG, consisting of 36 AWG copper strands, bunch stranded.

Insulation	Extruded NEOPRENE, 13 mils min average, 12 mils minimum at any point.

Assembly	Two or three conductors. Conductors twisted together with a maximum lay of 1-1/2 inches. One conductor shall be solid white or natural gray. The third, if provided shall be green with or without a yellow stripe.

Jacket	Extruded CP, 25 mils min average, 20 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Two Conductor Cord or Three Conductor Cord with No. 18 AWG Grounding Conductor: "As listed power supply cord (permanently attached and not exceeding 8 feet in length) for curling irons, wood burning appliances, or 1/2 pound and lighter soldering irons; rated 50 watts or less." Three Conductor Cord Grounding Conductor Smaller than No. 18 AWG: In addition to the statement above, the tag shall also indicate, "for use in appliance where grounding in not required.