UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4249
                        
                            Issued:1973-03-30
                    
                            Revised:2012-07-19
                    
                            Style
                            4249
                        
                            Parallel cable with extruded integral insulation and jacket
                    
			Rating105 deg C, 300 Vac.
		
			Conductor14 AWG - 10 AWG consisting of 30 AWG or smaller copper strands
		
			InsulationIntegral with Jacket. CP, 78 mils min average, 70 mils minimum at any point.
		
			AssemblyTwo conductors, same as type SP Cord with a nominal 80 mils wall of thermosetting chlorosulfonated polyethylene and the following (pin gauge) dimensions. Wall Thickness: 0.070 in., Web thickness: 0.109 in., Wall after rip: 0.043 in. See Facing Page for Compound Designation.
		
			Misc.Separator Paper. Not required when tinned conductors are employed.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of room cooler units where ripped not more than 3 in. unless installed in a separate metal enclosure. Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4249	Issued:1973-03-30
			Revised:2012-07-19


Rating	105 deg C, 300 Vac.

Conductor	14 AWG - 10 AWG consisting of 30 AWG or smaller copper strands

Insulation	Integral with Jacket. CP, 78 mils min average, 70 mils minimum at any point.

Assembly	Two conductors, same as type SP Cord with a nominal 80 mils wall of thermosetting chlorosulfonated polyethylene and the following (pin gauge) dimensions. Wall Thickness: 0.070 in., Web thickness: 0.109 in., Wall after rip: 0.043 in. See Facing Page for Compound Designation.

Misc.	Separator Paper. Not required when tinned conductors are employed.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of room cooler units where ripped not more than 3 in. unless installed in a separate metal enclosure. Polarity identification may be omitted.