UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4250
                        
                            Issued:1973-06-20
                    
                            Revised:2012-07-20
                    
                            Style
                            4250
                        
                            Multiple Conductor Cable with Extruded Insulation with an Extruded Non-integral Jacket.
                    
			Rating60 deg C, 125 Vac, Horizontal flame.
		
			Conductor22 AWG - 18 AWG consisting of 34 or 36 AWG copper strands, bunch stranded.
		
			InsulationExtruded NR - NEOPRENE, 13 mils min average, 10 mils minimum at any point.
		
			AssemblyTwo or three conductors twisted together with a max lay of 1-1/2 inches. One conductor shall be solid white or natural gray. The third, if provided, shall be green with or without a yellow stripe.
		
			JacketExtruded NR - NEOPRENE, 25 mils min average, 20 mils minimum at any point or see Facing Page.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseAs listed power supply cord (permanently attached and not exceeding 8 feet in length) for curling irons, wood burning appliances, or 1/2 pound and lighter soldering irons; rated 50 watts or less.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4250	Issued:1973-06-20
			Revised:2012-07-20


Rating	60 deg C, 125 Vac, Horizontal flame.

Conductor	22 AWG - 18 AWG consisting of 34 or 36 AWG copper strands, bunch stranded.

Insulation	Extruded NR - NEOPRENE, 13 mils min average, 10 mils minimum at any point.

Assembly	Two or three conductors twisted together with a max lay of 1-1/2 inches. One conductor shall be solid white or natural gray. The third, if provided, shall be green with or without a yellow stripe.

Jacket	Extruded NR - NEOPRENE, 25 mils min average, 20 mils minimum at any point or see Facing Page.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	As listed power supply cord (permanently attached and not exceeding 8 feet in length) for curling irons, wood burning appliances, or 1/2 pound and lighter soldering irons; rated 50 watts or less.