UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4257
                        
                            Issued:1976-03-02
                    
                            Revised:2019-11-07
                    
                            Style
                            4257
                        
                            Multiconductor Cable with Extruded Non-Integral Jacket
                    
			Rating90 deg C, 300 Vac, Cable flame.
		
			Conductor30 AWG minimum, solid or stranded round, tinned or bare copper.
		
			InsulationLabeled or complying with manufacturer's AWM procedure, 8 mils min average.
		
			AssemblyIndividually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional.
		
			JacketExtruded NR - NEOPRENE
		
			dia of cable under jacket
		
			0.425 inches or less45 mils min average40 mils min at any point
		
			0.426-0.700 dia60 avg48 min
		
			0.701-1.500 dia78 avg72 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnect of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4257	Issued:1976-03-02
			Revised:2019-11-07


Rating	90 deg C, 300 Vac, Cable flame.

Conductor	30 AWG minimum, solid or stranded round, tinned or bare copper.

Insulation	Labeled or complying with manufacturer's AWM procedure, 8 mils min average.

Assembly	Individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional.

Jacket	Extruded NR - NEOPRENE
	dia of cable under jacket
	0.425 inches or less	45 mils min average	40 mils min at any point
	0.426-0.700 dia	60 avg	48 min
	0.701-1.500 dia	78 avg	72 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnect of electronic equipment.