UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4265
                        
                            Issued:1977-02-10
                    
                            Revised:2011-11-18
                    
                            Style
                            4265
                        
                            Multiconductor cable with extruded non-integral jacket.
                    
			Rating105 deg C, 125 Vac, Cable flame.
		
			Conductor36 AWG - 20 AWG, solid or stranded.
		
			InsulationExtruded FEP or extruded PFA, 7 mils minimum average thickness, 6 mils minimum thickness at any point.
		
			AssemblyTwo or more insulated singles optionally twisted around a fluoropolymer filler or breather tube. Fillers may be used to form round cable.
		
			JacketInner jacket - Optional. Extruded SR, 20 mils minimum average thickness, 24 mils minimum thickness at any point.
		
			ShieldOptional.
		
			JacketExtruded SR.
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness 

at any point
		
			0.200 inch or less30 mils24 mils
		
			0.201-0.300 inch45 mils36 mils
		
			0.301-0.40060 mils48 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4265	Issued:1977-02-10
			Revised:2011-11-18


Rating	105 deg C, 125 Vac, Cable flame.

Conductor	36 AWG - 20 AWG, solid or stranded.

Insulation	Extruded FEP or extruded PFA, 7 mils minimum average thickness, 6 mils minimum thickness at any point.

Assembly	Two or more insulated singles optionally twisted around a fluoropolymer filler or breather tube. Fillers may be used to form round cable.

Jacket	Inner jacket - Optional. Extruded SR, 20 mils minimum average thickness, 24 mils minimum thickness at any point.

Shield	Optional.

Jacket	Extruded SR.
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.200 inch or less	30 mils	24 mils
	0.201-0.300 inch	45 mils	36 mils
	0.301-0.400	60 mils	48 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External wiring.