UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4276
                        
                            Issued:1977-09-14
                    
                            Revised:2012-07-15
                    
                            Style
                            4276
                        
                            Multiple Conductor Cable using Non-Integral Extruded Jacket
                    
			Rating90 deg C, No Voltage Specified, Cable Flame.
		
			Conductor30 AWG - 9 AWG, Solid or Stranded Round.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional.
		
			JacketExtruded CP
		
			diameter of cable under jacket in inchesmils minimum averagemils minimum at any point
		
			0.425 or less4536
		
			0.426-0.7006048
		
			0.701-1.5007862
		
			1.501-2.50010988
		
			2.501 and larger140112
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring or External Interconnection of Electronic Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4276	Issued:1977-09-14
			Revised:2012-07-15


Rating	90 deg C, No Voltage Specified, Cable Flame.

Conductor	30 AWG - 9 AWG, Solid or Stranded Round.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional.

Jacket	Extruded CP
	diameter of cable under jacket in inches	mils minimum average	mils minimum at any point
	0.425 or less	45	36
	0.426-0.700	60	48
	0.701-1.500	78	62
	1.501-2.500	109	88
	2.501 and larger	140	112

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring or External Interconnection of Electronic Equipment.