UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4277
                        
                            Issued:1977-09-14
                    
                            Revised:2019-11-07
                    
                            Style
                            4277
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating105 deg C, voltage not specified, Cable flame.
		
			Conductor30 AWG - 9 AWG solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM procedure, 5 mils min average.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional.
		
			JacketCP
		
			dia of cable under jacket
		
			0.425 inches or less45 mils min average36 mils min at any point
		
			0.426-0.700 dia60 avg48 min
		
			0.701-1.500 dia78 avg62 min
		
			1.501-2.500 dia109 avg88 min
		
			2.501 dia or larger140 avg112 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring or External Interconnection of Electronic Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4277	Issued:1977-09-14
			Revised:2019-11-07


Rating	105 deg C, voltage not specified, Cable flame.

Conductor	30 AWG - 9 AWG solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM procedure, 5 mils min average.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional.

Jacket	CP
	dia of cable under jacket
	0.425 inches or less	45 mils min average	36 mils min at any point
	0.426-0.700 dia	60 avg	48 min
	0.701-1.500 dia	78 avg	62 min
	1.501-2.500 dia	109 avg	88 min
	2.501 dia or larger	140 avg	112 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring or External Interconnection of Electronic Equipment.