UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4279
                        
                            Issued:1977-08-22
                    
                            Revised:2019-11-07
                    
                            Style
                            4279
                        
                            Multiple insulated conductors using non-integral jacket.
                    
			Rating105 deg C, 600 Vac, Cable flame.
		
			Conductor30 AWG - 9 AWG solid or stranded round, tinned or bare copper.
		
			InsulationLabeled or Complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional. 36 - 30 AWG tinned or untinned copper applied as a wrap or braid or a wrap of aluminum faced polyester tape. An uninsulated drain wire may be used. The shield may be over one or more of the insulated conductors or applied between the conductor assembly and the optional covering.
		
			CoveringOptional.  A nominal 15 mils of PVC covering may be extruded over the conductor assembly.
		
			BraidOptional.
		
			JacketExtruded XLPVC
		
			dia of cable under jacket
		
			0.425 inches or less45 mils min average36 mils min at any point
		
			0.426-0.700 dia60 avg48 min
		
			0.701-1.500 dia80 avg64 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal wiring
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4279	Issued:1977-08-22
			Revised:2019-11-07


Rating	105 deg C, 600 Vac, Cable flame.

Conductor	30 AWG - 9 AWG solid or stranded round, tinned or bare copper.

Insulation	Labeled or Complying with manufacturer's AWM procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional. 36 - 30 AWG tinned or untinned copper applied as a wrap or braid or a wrap of aluminum faced polyester tape. An uninsulated drain wire may be used. The shield may be over one or more of the insulated conductors or applied between the conductor assembly and the optional covering.

Covering	Optional. A nominal 15 mils of PVC covering may be extruded over the conductor assembly.

Braid	Optional.

Jacket	Extruded XLPVC
	dia of cable under jacket
	0.425 inches or less	45 mils min average	36 mils min at any point
	0.426-0.700 dia	60 avg	48 min
	0.701-1.500 dia	80 avg	64 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External wiring