UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4284
                        
                            Issued:1977-10-18
                    
                            Revised:2012-04-10
                    
                            Style
                            4284
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating60 deg C, voltage not specified, Horizontal flame.
		
			ConductorFor Control conductor - 24 AWG, stranded, minimum number of strands, 37.
For other conductor - 18 AWG, stranded, stranding same as for Type SJT cord.
		
			InsulationFor Control conductor - extruded FEP, Style 1226.
For other conductor - extruded EP, 50 mils min average, 45 mils minimum at any point.
		
			Conductor AssemblyA - Four Control conductors cabled around other conductor. Fillers as needed to make round. 
B - Same as A without Control conductors.
		
			JacketExtruded Neoprene, 50 mils min average, 40 mils minimum at any point. Extruded over insulated conductor.
		
			Cable AssemblyTwo components laid parallel. Components (shown in Conductor Assembly) may be either one of A and one B, or two of A.
		
			Overall JacketExtruded Neoprene, 50 mils min average, 40 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal defibrillator paddle cable where the acceptability of the combination has been determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4284	Issued:1977-10-18
			Revised:2012-04-10


Rating	60 deg C, voltage not specified, Horizontal flame.

Conductor	For Control conductor - 24 AWG, stranded, minimum number of strands, 37. For other conductor - 18 AWG, stranded, stranding same as for Type SJT cord.

Insulation	For Control conductor - extruded FEP, Style 1226. For other conductor - extruded EP, 50 mils min average, 45 mils minimum at any point.

Conductor Assembly	A - Four Control conductors cabled around other conductor. Fillers as needed to make round. B - Same as A without Control conductors.

Jacket	Extruded Neoprene, 50 mils min average, 40 mils minimum at any point. Extruded over insulated conductor.

Cable Assembly	Two components laid parallel. Components (shown in Conductor Assembly) may be either one of A and one B, or two of A.

Overall Jacket	Extruded Neoprene, 50 mils min average, 40 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal defibrillator paddle cable where the acceptability of the combination has been determined by Underwriters Laboratories Inc.