UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4289
                        
                            Issued:1978-07-17
                    
                            Revised:2019-11-07
                    
                            Style
                            4289
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating125 deg C, 600 Vac, Cable flame.
		
			Conductor30 AWG - 9 AWG solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			Shield36 - 30 AWG tinned or untinned copper applied as a wrap or braid or a wrap of aluminum faced polyester tape. An uninsulated drain wire may be used. The shield may be over one or more of the insulated conductors or applied between the conductor assembly and the optional covering.
		
			JacketExtruded XLPO - THERMOSET POLYOLEFIN - Irradiated Polyolefin
		
			dia of cable under jacket
		
			0.425 inches or less30 mils min average24 mils min at any point
		
			0.426-0.700 dia45 avg36 min
		
			0.701-1.500 dia60 avg48 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection of appliances or electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4289	Issued:1978-07-17
			Revised:2019-11-07


Rating	125 deg C, 600 Vac, Cable flame.

Conductor	30 AWG - 9 AWG solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	36 - 30 AWG tinned or untinned copper applied as a wrap or braid or a wrap of aluminum faced polyester tape. An uninsulated drain wire may be used. The shield may be over one or more of the insulated conductors or applied between the conductor assembly and the optional covering.

Jacket	Extruded XLPO - THERMOSET POLYOLEFIN - Irradiated Polyolefin
	dia of cable under jacket
	0.425 inches or less	30 mils min average	24 mils min at any point
	0.426-0.700 dia	45 avg	36 min
	0.701-1.500 dia	60 avg	48 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection of appliances or electronic equipment.