UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4291
                        
                            Issued:1978-10-03
                    
                            Revised:2012-05-03
                    
                            Style
                            4291
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating200 deg C, 300 Vac, Horizontal flame.
		
			Conductor18 AWG - 16 AWG solid or stranded.
		
			InsulationExtruded SR, 15 mils minimum average thickness, 13 mils minimum thickness at any point. Labeled or complying with manufacturer's AWM procedure. Type SF-1 or Style 3122.
		
			AssemblyTwo insulated singles and optional insulated or uninsulated ground lead laid parallel. Optional Twisted Kevlar, Aramid or polyester strength member laid parallel.
		
			JacketExtruded SR, 30 mils minimum average thickness, 24 mils minimum thickness at any point.
		
			BraidOptional - Polyester.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseSupply leads for fixtures where not subject to mechanical abuse, and where the acceptability of the combination is determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 4	Page 4291	Issued:1978-10-03
			Revised:2012-05-03


Rating	200 deg C, 300 Vac, Horizontal flame.

Conductor	18 AWG - 16 AWG solid or stranded.

Insulation	Extruded SR, 15 mils minimum average thickness, 13 mils minimum thickness at any point. Labeled or complying with manufacturer's AWM procedure. Type SF-1 or Style 3122.

Assembly	Two insulated singles and optional insulated or uninsulated ground lead laid parallel. Optional Twisted Kevlar, Aramid or polyester strength member laid parallel.

Jacket	Extruded SR, 30 mils minimum average thickness, 24 mils minimum thickness at any point.

Braid	Optional - Polyester.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Supply leads for fixtures where not subject to mechanical abuse, and where the acceptability of the combination is determined by Underwriters Laboratories Inc.