UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4300
                        
                            Issued:1979-10-31
                    
                            Revised:2012-03-31
                    
                            Style
                            4300
                        
                            Parallel cable with extruded integral insulation and jacket
                    
			Rating125 deg C, 600 Vac.
		
			Conductor14 AWG - 10 AWG solid or stranded round, tinned or bare copper, consisting of 30 AWG or smaller copper strands.
		
			InsulationIntegral with Jacket. ETHYLENE/ACRYLIC ELASTOMER, 80 mils min average, 72 mils minimum at any point.
		
			AssemblyTwo or three Ethylene/acrylic elastomer conductors (see Facing Page for Compound Identification) with the following dimensions: Wall thickness: 0.080 inches, Web thickness: 0.109 inches, Wall after rip: 0.043 inches.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseAs motor lead wire in outdoor condensing units for domestic cooling systems where the acceptability has been determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 4	Page 4300	Issued:1979-10-31
			Revised:2012-03-31


Rating	125 deg C, 600 Vac.

Conductor	14 AWG - 10 AWG solid or stranded round, tinned or bare copper, consisting of 30 AWG or smaller copper strands.

Insulation	Integral with Jacket. ETHYLENE/ACRYLIC ELASTOMER, 80 mils min average, 72 mils minimum at any point.

Assembly	Two or three Ethylene/acrylic elastomer conductors (see Facing Page for Compound Identification) with the following dimensions: Wall thickness: 0.080 inches, Web thickness: 0.109 inches, Wall after rip: 0.043 inches.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	As motor lead wire in outdoor condensing units for domestic cooling systems where the acceptability has been determined by Underwriters Laboratories Inc.