UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4312
                        
                            Issued:1980-06-11
                    
                            Revised:2012-04-02
                    
                            Style
                            4312
                        
                            Multiple-Conductor Cable Using Extruded Non-Integral Jacket
                    
			Rating125 deg C, 300 Vac, Cable flame.
		
			InsulationLabeled or complying Manufacturer's AWM Procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing, and is applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional.
		
			CoveringOptional. Extruded XLPE covering having a minimum thickness of 10 mils, may be employed over the conductor assembly.
		
			BraidOptional.
		
			JacketExtruded XLPE
		
			Diameter of core assembly under jacket (inches)Minimum average thickness (mils)Minimum thickness at any point (mils)
		
			0.700 or less3024
		
			0.701-1.0004536
		
			1.001-1.5006048
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnect of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4312	Issued:1980-06-11
			Revised:2012-04-02


Rating	125 deg C, 300 Vac, Cable flame.

Insulation	Labeled or complying Manufacturer's AWM Procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing, and is applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional.

Covering	Optional. Extruded XLPE covering having a minimum thickness of 10 mils, may be employed over the conductor assembly.

Braid	Optional.

Jacket	Extruded XLPE
	Diameter of core assembly under jacket (inches)	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0.700 or less	30	24
	0.701-1.000	45	36
	1.001-1.500	60	48

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnect of electronic equipment.