UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4313
                        
                            Issued:1980-06-11
                    
                            Revised:2012-12-11
                    
                            Style
                            4313
                        
                            Multi-conductor Cable with Extruded Non-Integral Jacket.
                    
			Rating125 deg C, 600 Vac, Cable flame.
		
			InsulationLabeled or complying Manufacturer's AWM Procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together.  All conductors in any group twisted together.  If more than one group is used, groups shall also be twisted together.  The length of lay of the twisted conductors or groups is not specified.  A barrier layer, if employed, may be a fibrous wrap serving, or braid, paper, Nylon, oriented PET or a thermoplastic-tape wrap.  Such a barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			CoveringOptional - Extruded XLPE, 10 mils minimum thickness at any point.  May be extruded over the conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded XLPE
		
			dia of cable under jacket is 0.425 inches or less45 mils min average36 mils min at any point
		
			0.426-0.700 dia60 avg48 min
		
			0.701-1.500 dia80 avg64 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnect of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4313	Issued:1980-06-11
			Revised:2012-12-11


Rating	125 deg C, 600 Vac, Cable flame.

Insulation	Labeled or complying Manufacturer's AWM Procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid, paper, Nylon, oriented PET or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Covering	Optional - Extruded XLPE, 10 mils minimum thickness at any point. May be extruded over the conductor assembly.

Shield	Optional.

Jacket	Extruded XLPE
	dia of cable under jacket is 0.425 inches or less	45 mils min average	36 mils min at any point
	0.426-0.700 dia	60 avg	48 min
	0.701-1.500 dia	80 avg	64 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnect of electronic equipment.