UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4344
                        
                            Issued:1984-04-12
                    
                            Revised:2012-05-15
                    
                            Style
                            4344
                        
                            Multi-conductor Cable with Extruded Non-Integral Jacket.
                    
			Rating90 deg C, 300 Vac, Cable flame.
		
			Conductor32 AWG minimum, solid or stranded.
		
			Insulated ConductorLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors laid parallel or cabled together to form a flat, oval or round cable.  Conductors in any group twisted together.  If more than one group is used, groups shall also be twisted together.  The length of lay of the twisted conductors or groups is not specified.  The use of a barrier layer and/or fillers is optional.  Cable may contain Labeled Flat Ribbon Style AWM which may be rolled or spiralled and formed around fillers or bunched singles.  Fillers and/or tape wrap or extruded covering may be used.
		
			ShieldOptional.
		
			JacketExtruded CP
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701 - 1.000 inch60 mils48 mils
		
			1.001 - 1.500 inch80 mils64 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of electronic equipment or internal wiring of electronic equipment or appliances. Tags may also indicate the following: "600 Volts peak for Electronic Use Only".
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4344	Issued:1984-04-12
			Revised:2012-05-15


Rating	90 deg C, 300 Vac, Cable flame.

Conductor	32 AWG minimum, solid or stranded.

Insulated Conductor	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors laid parallel or cabled together to form a flat, oval or round cable. Conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. The use of a barrier layer and/or fillers is optional. Cable may contain Labeled Flat Ribbon Style AWM which may be rolled or spiralled and formed around fillers or bunched singles. Fillers and/or tape wrap or extruded covering may be used.

Shield	Optional.

Jacket	Extruded CP
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701 - 1.000 inch	60 mils	48 mils
	1.001 - 1.500 inch	80 mils	64 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of electronic equipment or internal wiring of electronic equipment or appliances. Tags may also indicate the following: "600 Volts peak for Electronic Use Only".