UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4354
                        
                            Issued:1984-05-18
                    
                            Revised:2014-06-20
                    
                            Style
                            4354
                        
                            Multiconductor cable with extruded non-integral jacket.
                    
			Rating105 deg C, voltage not specified, Cable flame.
		
			Conductor40 AWG minimum. Material not specified.
		
			InsulationLabeled or complies with manufacturer's AWM Procedure.
		
			AssemblyTwo or more twisted singles or groups of twisted singles twisted together. Lay not specified. Barrier layer and/or fillers optional. manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional.
		
			JacketExtruded SR.
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.425 inch or less45 mils36 mils
		
			0.426-0.700 inch60 mils48 mils
		
			0.701-1.500 inch80 mils64 mils
		
			1.501-2.500 inch110 mils88 mils
		
			2.501 inch and larger140 mils112 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external wire.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4354	Issued:1984-05-18
			Revised:2014-06-20


Rating	105 deg C, voltage not specified, Cable flame.

Conductor	40 AWG minimum. Material not specified.

Insulation	Labeled or complies with manufacturer's AWM Procedure.

Assembly	Two or more twisted singles or groups of twisted singles twisted together. Lay not specified. Barrier layer and/or fillers optional. manufacturer shall maintain a complete description of each assembly.

Shield	Optional.

Jacket	Extruded SR.
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.425 inch or less	45 mils	36 mils
	0.426-0.700 inch	60 mils	48 mils
	0.701-1.500 inch	80 mils	64 mils
	1.501-2.500 inch	110 mils	88 mils
	2.501 inch and larger	140 mils	112 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external wire.