UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4358
                        
                            Issued:1985-02-20
                    
                            Revised:2012-07-16
                    
                            Style
                            4358
                        
                            Multiple-Conductor Cable using Non-Integral Jacket.
                    
			Rating60, 75, 90 deg C, 600 Vac, FT-2 Flame, 60 deg C Oil (for Jakcet).
		
			Conductor18 AWG - 2 AWG, Solid or Stranded Round.
		
			InsulationExtruded EP or Extruded SBR/NR or Extruded Neoprene or Extruded CP or Extruded Thermoset CPE or Extruded NBR/PVC, Same as for Type SO except as described below.
		
			Conductor AWG Sizemils minimum averagemils minimum at any point
		
			18-162018
		
			14-103027
		
			8-24540
		
			CoveringEach insulated conductor shall have a 4 mil minimum at any point extruded Nylon covering.
		
			AssemblySame as for Type SO Cord.
		
			JacketExtruded EPDM or Extruded Neoprene or Extruded CP or Extruded Thermoset CPE or Extruded NBR/PVR or Extruded SBR/NR, same as for Type SO Cord except as descibed below.
		
			Diameter of cable under jacket in inchesmils minimum averagemils minimum at any point
		
			0.425 or less4536
		
			0.426-0.7006048
		
			0.701-1.5008064
		
			1.501-2.50011088
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring or External Interconnection.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 4	Page 4358	Issued:1985-02-20
			Revised:2012-07-16


Rating	60, 75, 90 deg C, 600 Vac, FT-2 Flame, 60 deg C Oil (for Jakcet).

Conductor	18 AWG - 2 AWG, Solid or Stranded Round.

Insulation	Extruded EP or Extruded SBR/NR or Extruded Neoprene or Extruded CP or Extruded Thermoset CPE or Extruded NBR/PVC, Same as for Type SO except as described below.
	Conductor AWG Size	mils minimum average	mils minimum at any point
	18-16	20	18
	14-10	30	27
	8-2	45	40

Covering	Each insulated conductor shall have a 4 mil minimum at any point extruded Nylon covering.

Assembly	Same as for Type SO Cord.

Jacket	Extruded EPDM or Extruded Neoprene or Extruded CP or Extruded Thermoset CPE or Extruded NBR/PVR or Extruded SBR/NR, same as for Type SO Cord except as descibed below.
	Diameter of cable under jacket in inches	mils minimum average	mils minimum at any point
	0.425 or less	45	36
	0.426-0.700	60	48
	0.701-1.500	80	64
	1.501-2.500	110	88

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring or External Interconnection.