UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4364
                        
                            Issued:1986-01-13
                    
                            Revised:2012-07-25
                    
                            Style
                            4364
                        
                            Parallel cable with extruded integral insulation and jacket
                    
			Rating105 deg C, 300 Vac.
		
			Conductor18 AWG - 10 AWG consisting of 30 AWG or smaller copper strands.
		
			InsulationIntegral with Jacket. EP, 78 mils min average, 70 mils minimum at any point.
		
			AssemblyTwo, three or four conductors, sames as for type SP and the following (pin gauge) dimensions: Wall thickness: 0.070 in., Web thickness: 0.109 in., Wall after rip: 0.043 in.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of room cooler units where ripped not more than 3 in. unless installed in a separate metal enclosure. Internal wiring of remote outdoor condensing units for domestic cooling systems. Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4364	Issued:1986-01-13
			Revised:2012-07-25


Rating	105 deg C, 300 Vac.

Conductor	18 AWG - 10 AWG consisting of 30 AWG or smaller copper strands.

Insulation	Integral with Jacket. EP, 78 mils min average, 70 mils minimum at any point.

Assembly	Two, three or four conductors, sames as for type SP and the following (pin gauge) dimensions: Wall thickness: 0.070 in., Web thickness: 0.109 in., Wall after rip: 0.043 in.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of room cooler units where ripped not more than 3 in. unless installed in a separate metal enclosure. Internal wiring of remote outdoor condensing units for domestic cooling systems. Polarity identification may be omitted.