UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4365
                        
                            Issued:1986-01-13
                    
                            Revised:2008-05-27
                    
                            Style
                            4365
                        
                            Parallel cable with extruded integral insulation and jacket.
                    
			Rating105 deg C, 600 Vac.
		
			Conductor18 AWG - 10 AWG consisting of 30 AWG or smaller copper strands, solid or stranded round.
		
			InsulationIntegral with Jacket. EPDM, 60 mils minimum average, 56 mils minimum at any point.
		
			AssemblyTwo, three or four conductors, sames as for type SP and the following (pin gauge) dimensions: Wall thickness: 0.058 in., Web thickness: 0.078 in., Wall after rip: 0.028 in.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Electric Refrigeration or other equipment where ripped not more than three inches unless installed in a separate metal enclosure; or for use only in the wiring of butter conditioners where exposed at the door hinge. Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 4	Page 4365	Issued:1986-01-13
			Revised:2008-05-27


Rating	105 deg C, 600 Vac.

Conductor	18 AWG - 10 AWG consisting of 30 AWG or smaller copper strands, solid or stranded round.

Insulation	Integral with Jacket. EPDM, 60 mils minimum average, 56 mils minimum at any point.

Assembly	Two, three or four conductors, sames as for type SP and the following (pin gauge) dimensions: Wall thickness: 0.058 in., Web thickness: 0.078 in., Wall after rip: 0.028 in.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Electric Refrigeration or other equipment where ripped not more than three inches unless installed in a separate metal enclosure; or for use only in the wiring of butter conditioners where exposed at the door hinge. Polarity identification may be omitted.